UAV Navigation releases its new Visual Navigation System (VNS). This exciting new capability is bound to cause a stir amongst manufacturers and end users of NATO Category I and II UAS. The compact and lightweight device, which is provided as an optional peripheral to the main Flight Control System (FCS), enables the safe and efficient navigation of Uncrewed Aerial Vehicles (UAVs) in GNSS-denied environments. The VNS combines “visual odometry” techniques and “pattern identification” with the rest of the sensors onboard the aircraft to ensure that the absolute position, orientation and relative movement of the aircraft over the ground is calculated with astonishing accuracy.
The planning and execution of UAV missions in environments in which the GNSS signal is either unavailable or unreliable is becoming more and more critical. For some missions, the datalink to the Ground Control Station (GCS) may be subject to interference, or indeed the operation dictates that the flight must be performed without a datalink from the outset. Under these circumstances, UAS traditionally rely on an inertial navigation system (INS) to complete the mission. However, all such inertial systems accumulate navigational drift due to sensor noise, propagation models and the difficulty in characterizing external forces. This positional error limits any such UAS operation as an accurate position cannot be guaranteed.
The new VNS, combined with the VECTOR range of flight control systems, effectively addresses this problem by using data which is independent of the GNSS constellation and which is more accurate than INS. The system identifies patterns in the terrain below in order to assist in cancelling out any accumulated error, thereby allowing the UAS to operate for long periods of time without losing positional precision. In addition, thanks to its reduced size and weight, it can be installed in Category I and II UAS, enabling them to take advantage of this navigation technique without penalizing autonomy or payload capacity.
The new VNS, which has been developed entirely by the Spanish company UAV Navigation, part of the Oesía Group, has produced outstanding results during flight testing, both on fixed-wing platforms, typically with higher airspeeds and greater service ceiling and also rotary wing platforms, where high vibrations and hover manoeuvres are typically a problem. The new VNS has proved its ability to provide accurate navigational information for flights where there may be an intermittent loss of GNSS signal and also when a flight must be executed from the outset without GNSS data.
UAV Navigation and Grupo Oesía, national leaders in safe and reliable multi-mission systems for unmanned vehicles, are shaking up the UAS sector, investing in innovative systems that combine cutting-edge technology with decades of experience to provide outstanding navigation systems capable of operating in hostile environments.
UAV Navigation – Grupo Oesía
UAV Navigation is a private company with 100% Spanish capital. It has specialized in the design of guidance, navigation and control solutions (GNC) for Unmanned Aerial Vehicles (UAVs) since 2004. The flight control solutions are characterized by their reliability and robustness, being used on all kinds of platforms and under all weather conditions. These include high-performance tactical unmanned aircraft, VTOL fixed-wing platforms, aerial targets, mini-UAVs and helicopters.
UAV Navigation is part of the multinational Oesia Group, a Spanish group of companies with more than 45 years of experience designing, developing and maintaining cutting-edge technology for the Security, Defense and Aerospace sectors; it also has a long history of work in avionics for national level projects. The Oesia Group is involved in the whole system life cycle (design, development, qualification and maintenance) of critical and non-critical flight systems for Eurofighter EF-2000, A-400M, F-18, C-295, P3-B Orión or MH-60R. The Group is now involved in the most challenging UAV projects, such as the FCAS/NGWS, Eurodrone and SIRTAP.
Oesia Group has over 3,500 employees with 15 offices in Spain and America. It is working on projects in 23 different countries with the main purpose of creating a better, more efficient, safer and sustainable world. UAV Navigation uses a worldwide network of distributors to supply its cutting-edge capabilities around the world. www.uavnavigation.com
Post navigation