Home Assistant Core 2023.8! đ
Another month, another fine release of Home Assistant! This release is a bit more
conservative after two absolutely packed releases in June
and July. Many of us are enjoying summer holidays đď¸.
Pretty much all features in this release are absolutely amazing, and it is hard
to pick a favorite. Great translation improvements that help with the user
experience, a new entity to capture events from things like remotes, and the
new Assist features are, again, mind-blowing!
Talking about Assist, have you seen the blog on Year of the Voice – Chapter 3?
Or, check the live stream recording on YouTube,
where the new features have been demonstrated.
Some new integrations have been added too. Most notably Opower!
This integration can pull in energy usage data from many utility companies in
the United States. For example, it supports PG&E,
ComEd, BGE, and many more! âĄď¸
Very good news for all our American friends!
Enjoy the release!
../Frenck
Donât forget to join our release party live stream on YouTube
2 August 2023, at 12:00 PDT / 21:00 CEST!
Translated services
All services in Home Assistant are now translatable! đ
Services are the actions you can call, like turning on a light. This was one of
the bigger parts of Home Assistant that still was only available in English.
Odd, as the Home Assistant interface can be used in 60+ languages!
In this release, translations for these services have been added to drastically
improve the experience when English is not your primary language. For example,
when you use the Dutch language (as used in the screenshot below), the service
to turn on a light is now also translated into Dutch.
A big step forward! Implementing this change has resulted in a substantial
increase in the number of translations. They have doubled! đ
Because of that, translating all services might take some time; howeverâŚ
You can help! You donât have to be a developer to help with this; you can do this
from the comfort of your browser. Check out our documentation on
how to contribute translations.
Introducing the event entity
Events are signals that are emitted when something happens, for example, when
someone presses a physical button like a doorbell or when a button on a remote
control is pressed.
If you have ever tried to work with events in Home Assistant, you probably
noticed that it was not the easiest thing to do. You need to know the event name,
and then you need to know the data that is being sent with it. Before you know it,
youâll start fiddling with the developer tools to figure out what is going on.
To make this all easier, we are introducing a new entity type in this release:
The event entity.
The event entity can capture these events in the physical world and makes them
available in Home Assistant as an entity. Take for example, this Hue remote:
The beauty of the event entity is that they can be used like any other entity
in Home Assistant: They will show up in the UI, can be used directly in the
automations editor, and provide historical information in the logbook.
Besides Matter, the event entity is also supported by
HomeKit Devices, MQTT,
and Philips Hue. We expect to see more integrations
supporting this new entity type soon.
Improving the first experience with Home Assistant
Onboarding is a userâs first experience with Home Assistant. The onboarding
screens are the first you see, and steps you take when you access Home Assistant
for the first time, setting up things like your account and language preferences.
The goal is to ensure this process is seamless, which is why weâve made
improvements to the onboarding experience.
To achieve this, we have implemented a search field on the map during
onboarding. Instead of endlessly dragging the pin on the map around,
you can now easily search for your location.
This is powered by OpenStreetMap â¤ď¸
Add items to your shopping list using Assist
What if you could ask Assist to add items to your
Home Assistant shopping list? Well, now you can!
Add milk to my shopping list!
In case you are wondering, the shopping list integration adds a handy page to
your Home Assistant interface to which everyone in your household can add items.
It is a great way to keep track of what you need to buy, and now you can
add items to it with your voice using Assist!
To be able to use this feature, you need to have the shopping list integration
set up, which is as easy as clicking the My Home Assistant button below:
Generate an image with OpenAIâs DALL-E
In the last release, we added the ability for services to respond with data,
and now we added a service that allows you to generate an image using
OpenAIâs DALL-E.
All you need is to set up the OpenAI conversation agent
integration on your instance, and you will get a new service:
openai_conversation.generate_image.
Call this service describing the image youâd like the AI to generate, and
it will respond with an image URL you can use in your automations.
You could, for example, use this to generate an image of a city that matches
the weather conditions outside of your home, let the AI generate an image
about the latest news headline to show on your dashboard, or maybe generate
a fun image of someone putting out garbage on garbage day.
You could even combine it with the wildcard support for sentence triggers so you
could ask Home Assistant to generate an image using your voiceâŚ
Wildcard support for sentence triggers
Sentence triggers now support
wildcards! This means you can now partially match a sentence, and use the
matched part in your actions. This is what powers the above
shopping list feature
too, and it can be used for many other things as well.
You could, for example, create a sentence trigger that matches when you say:
Play the white album by the Beatles
Using the wildcard support, you can get the album and artist name from the spoken
sentence and use those in your actions. To trigger on the above example sentence,
you would use the following command in your sentence trigger:
This will make the album and artist available as trigger variables that you
can use in your actions; for example, to start playing the music requested.
These wildcards are interesting and open up a lot of possibilities!
Read more about sentence triggers in our documentation.
JLo realized he could use these wildcards, combined with the new
generate image service, to let
Home Assistant generate an image and show it on his Chrome Cast-enabled device
just by using his voice! đ You could ask it:
Show me a picture of an astronaut riding a unicorn!
He put this together in an automation blueprint, which you can use to do the
same thing in your own Home Assistant instance:
Provide the sentence you like to trigger on and the media player you want to
show the image at, and youâre good to go! You can import his blueprint using
the My Home Assistant button below:
Condition selector
A new selector is available for use in, for example, blueprints:
The condition selector.
This selector takes and shows the condition part of the automation editor,
and allows blueprint creators to use a user-provided condition in their
blueprinted automations and scripts.
This blueprint allows one to set a custom condition using the new condition selector.
Other noteworthy changes
There are many more improvements in this release; here are some of the other
noteworthy changes this release:
Tons of performance upgrades again this month (thanks @bdraco), these
include a much faster ingress experience when visiting add-on web interfaces. đ
@emontnemery added filters to many of the services Home Assistant provides,
meaning only options relevant to the entity you are calling the service on
will be shown in the UI. Nice!
CO2Signal changed its name to Electricity Maps. The integration
has been renamed to match that. Thanks, @madsnedergaard!
@Lash-L keeps extending the Roborock integration, adding many new entities
in this release. This includes an error sensor, volume controls,
and DnD setting times. Awesome!
EZVIZ received a big update, adding support for alarm control panels, buttons,
and select entities. Thanks @RenierM26!
@farmio added support for adding date and date/time entities to KNX! Great!
The Xiaomi BLE now supports the MiScale (V1 and V2). Thanks, @Ernst79!
UniFi Network now has controls to turn an UniFi WLAN on and off and added
image entities for QR codes for WLAN access. Thanks, @Kane610!
New integrations
We welcome the following new integrations in this release:
This release also has a new virtual integration. Virtual integrations
are stubs that are handled by other (existing) integrations to help with
findability. These are new:
Integrations now available to set up from the UI
The following integrations are now available via the Home Assistant UI:
Need help? Join the community!
Home Assistant has a great community of users who are all more than willing
to help each other out. So, join us!
Our very active Discord chat server is an excellent place to be
at, and donât forget to join our amazing forums.
Found a bug or issue? Please report it in our issue tracker,
to get it fixed! Or, check our help page for guidance for more
places you can go.
Are you more into email? Sign-up for our Building the Open Home Newsletter
to get the latest news about features, things happening in our community and
other news about building an Open Home; straight into your inbox.
Breaking changes
Python 3.10 support has been removed
Python 3.10 support has previously been deprecated and has now been removed.
Home Assistant now requires Python 3.11 to run.
You donât have to do anything if you are using Home Assistant OS,
Home Assistant Container, or Home Assistant Supervised installation method.
In those cases, we handle this all for you.
Your system has been using Python 3.11 for quite some time already.
(@frenck – #97007)
Discovery
The legacy discovery integration has been removed. This only affects the
automatic discovery of Enigma2, Yamaha Network Receivers, and Bluesound.
These can still be manually configured as per usual.
Note this is for our very, very old discovery logic. This does not affect the
discovery of any other integration/device/service.
If you still have discovery: listed in your YAML configuration, you can
safely remove it.
(@frenck – #96856)
Ecovacs
The Ecovacs integration has been migrated to the new âStateVacuumEntityâ
under the hood.
The states of the vacuum entity now report not only on or off,
instead cleaning, paused, docked (implicit mean charging),
returning (to base), idle and error. Further, the actions turn_on
(start cleaning), and turn_off (stop cleaning and return to base) were
superseded by three single actions start, stop and return_to_base.
(@mib1185 – #95920) (documentation)
MQTT
Itâs no longer allowed for an MQTT RGB light without a brighness_state_topic
to report an RGB value of RGB=0,0,0. The reason is that for such lights,
the lightâs brightness is derived from the RGB value, and an RGB value
of RGB=0,0,0 corresponds to a brightness of 0 which is not allowed.
In case an MQTT RGB light without a brighness_state_topic reports 0,0,0
for R, G, and B, that update will be ignored.
(@jbouwh – #96286) (documentation)
The MQTT climate CONF_POWER_STATE_TOPIC and CONF_POWER_STATE_TEMPLATE were
deprecated in HA Core 2023.2.0 and are now removed. Please remove these options
from your configuration. The options were not implemented but will break your
MQTT configuration if they are still present in your config.
(@jbouwh – #96771) (documentation)
The way MQTT entities are named and how device configuration can be shared
between discovered entities has changed.
Sharing of device configuration
Discovered MQTT entities can share device configuration, meaning one entity
can include the full device configuration, and other entities can link to that
device by only setting mandatory fields.
The mandatory fields were previously limited to at least one of
connection and identifiers, but have now been extended to at least
one of connection and identifiers as well as the name.
Naming of MQTT entities
The naming of MQTT entities has been changed to be aligned with the
entity naming guidelines:
The has_entity_name entity will be set to True on all MQTT entities.
This means any MQTT entity which is part of a device will automatically have its friendly_name attribute prefixed with the device name.
Unnamed binary_sensor, button, event, number, and sensor entities will
now be named by their device class instead of being named âMQTT binary sensorâ etc.
Itâs now allowed to set an MQTT entityâs name to None to mark it as the
main feature of a device.
(@jbouwh – #95159) (documentation)
Philips Dynalite
The Dynalite configuration panel, which previously was on the Home Assistant
sidebar, has moved. It can now be accessed via the integration page in
Settings -> Device & services -> Dynalite -> Configure.
(@frenck – #95920) (documentation)
Renson
The state values of the Reason Ventilation integration have been changed to
be more consistent with other integrations and are now lowercase. Additionally,
it can now provide translations for the state values in the UI.
This means that the following state values have changed:
Off -> off
Level1 -> level1
Level2 -> level2
Level3 -> level3
Level4 -> level4
Breeze -> breeze
Holiday -> holiday
Please update any automations where you are using the state of this Renson sensor.
If you are a custom integration developer and want to learn about breaking
changes and new features available for your integration: Be sure to follow our
developer blog. The following are the most notable for this release:
Farewell to the following
The following integrations are also no longer available as of this release:
Discovery has been removed. This is the old legacy discovery integration.
See the breaking changes above for more information.(@frenck – #96856)
Mi Flora has been removed. This integration was replaced by the
Xiaomi BLE integration a long time ago and was in a non-functional state.(@frenck – #96868)
Xiaomi Mijia BLE T&H Sensor has been removed. This integration was
replaced by the Xiaomi BLE integration a long time ago and was in a
non-functional state.(@frenck – #96869)
All changes
Of course, there is a lot more in this release. You can find a list of
all changes made here: Full changelog for Home Assistant Core 2023.8